DeleteOpts:This option will delete the files 'EditorOpts' and 'ImageOpts' from the editors 'Resources' directory if they exist. A window is displayed informing the user what files, if any, where deleted.
OptionsDeleted:The file%0 been deleted.
NoOptionDeleted:No option files to delete.
ScreenModified:Screen modified. Continue?
FollowingModified:The following screens have been modified
DragIcon:To save, drag the icon to a directory window
Warning:Warning from AnsiEdit v2.30
LinesToSave:Only %0 lines will be saved? OK to save, Cancel to stop
Exists:%0 already exists. Ok to continue, Cancel to stop
ErrorSaving:Error when saving %0
ErrorLoading:Error when loading %0
NotFontFile:%0 is not a 'BBC Font' file
NotPaletteFile:%0 is not a 'Palette' file
NotDirectory:%0 is not a directory
NotAnsiSave:%0 is not a 'AnsiSave' file
ErrorLoading:Error loading %0
CantLoadDirectories:Can't load directories
NoPattern:No pattern selected
BarIcon:This is the AnsiEdit v2.30 application, a colour text editor.|MClick SELECT to edit a screen, MENU to display the menu or ADJUST to display the 'Preferences' window.
SaveWindow:This box allows you to save data in a file.
SaveWindow0:Drag this icon to the directory in which you want to save the file.
SaveWindow1:This shows the filename for this data. If it is not a full pathname, drag the icon into a directory display.
SaveWindow2:Click here to save the data with the current filename. If it is not a full pathname, you must drag the icon to a directory first.
FileInfo:This window displays information about the file being edited.
ProgInfo:This window displays information about AnsiEdit.
AnsiMan:'Ansi Man' is the authors alias which is sometimes used on Odyssey BBs when leaving messages.
ToWarnings:Open the 'Warnings' window by clicking on this icon.
Key:Enter the editor using %0.
KeyWindow:This window allows the editor hot key to be choosen.
CtrlPanel:These options allow the setting of the 'Control Panel'.
CtrlTop:Sets the control panel to the top of the screen.
CtrlBottom:Sets the control panel to the bottom of the screen.
CtrlNone:Removes the control panel from the screen.
Transparent:Sets the transparency option for copying / moving blocks.
EditorOpts:Editors Options
Hourglass:Toggle the 'Hourglass' with a percentage underneath, on and off.
Insert:Toggle 'Insert' mode on and off.
Draw:Toggle Draw mode on and off.
CursorOn:Toggles cursor position on and off.
CLSPrompt:Toggle the CLS prompting on and off. When prompted during loading press 'y' or left mouse button to continue, otherwise stops.
Pattern:Toggle Pattern mode on and off.
Archive:If the editor is run from an archive this option should be turned on to stop the program crashing!!!!
FileTypes:File Types
LoadAnsi:Toggle the loading of 'Ansi' files by double-clicking them, on and off.
LoadBBCFont:Toggle the loading of 'BBC Font' files by double-clicking them, on and off.
LoadData:Toggle the loading of 'Data' files by double-clicking them, on and off.
LoadText:Toggle the loading of 'Text' files by double-clicking them, on and off.
LoadAny:Toggle the loading of any file, except directories, by double-clicking on them, on and off.
ToShortCut:Open the 'Keyboard Short-Cut' window by clicking on this icon.
ToLoadResources:Open the 'Load Resources' window by clicking on this icon.
ToLoadDetails:Open the 'Load Details' window by clicking on this icon.
ToSaveDetails:Open the 'Save Details' window by clicking on this icon.
Defaults:Resets all options to there program defaults.
LoadOpts:Reloads the editor and desktop options files, if present, or does the same as 'Defaults'.
SaveOpts:Save the current option settings to the applications directory.
ScrapDir:Scrap Directory
DirName:Enter in here the name of the directory any 'Scrap' or temporary files should be written to, or drag the directory to the window, or click menu for a window of commonly used scrap directories.
PrefsOpts:This window allows the setting of various Ansi Edit options.|MBefore altering any of these options it is advised that you read the file 'UserGuide' in the 'Documents' directory.
LoadAnsiSave:Drag or enter name of the 'AnsiSave' file to load.
LoadFont:Drag or enter name of the 'BBC Font' file to load.
LoadPalette:Drag or enter name of the 'Palette' file to load.
LoadResources:Allows the loading of Fonts, Palettes and 'AnsiSave' Files.
ModeChange:Do an initial mode change when files saved as a 'BBC Font' file.
FontData:Include font data in a 'BBC Font' file.
PaletteData:Include palette data in a 'BBC Font' file.
AddEOF:Add End-Of-File marker when saving a 'Ansi', 'BBC Font' or 'Text' file.
SaveReverse:Saves 'BBC Font' and 'Ansi' files in reverse.
AnsiLines:How many screen lines to save when saving a 'Ansi' file.
AnsiLinesBox:Enter in here the the number of lines to save.
NameOfAnsiSave:Enter here the name of a new 'AnsiSave' file to use or drag one to icon or double-click on one.
LoadedAnsiSave:Name of current loaded 'AnsiSave' file.
LengthOfPause:Length of pause between characters.
LengthOfPauseBox:Enter in here the required length of pause.
SaveDetails:Set options for when saving a file.
Display:Displays file while saving.
ClearingScreen:Clearing screen %0
ScreenClearing:Screen %0 is been cleared
PrintingScreen:Printing screen %0
LoadFileOpts:These options are for when a file is being loaded.
BlockBits:These options are used when using block commands.
Transparent:Toggles transparency on and off when using blocks.
UpdateBlk:When on if part of the screen is selected automatically updates the block.
DeleteLeft:If this option is on then Ctrl & Alt & D will move from right to left when deleting blocks. If the option is off then will move from bottom to top instead.
MajorWarnings:If this option is on then the major warnings will appear when dealing with commands. If the option is off then the command will be done with no prompting. USE WITH CARE YOU HAVE BEEN WARNED!!!!!
MinorWarnings:If this option is on then the minor warnings will appear when dealing with commands. If the option is off then the command will be done with no prompting. USE WITH CARE YOU HAVE BEEN WARNED!!!!!
WarningSection:These options deal with the toggling of the 'Warning' messages.
MouseButtons:These options affect the way the mouse is used when dealing with blocks.
NoButtons:Turns mouse off when dealing with blocks.
OneButton:The mouse is only clicked once when dealing with blocks.
TwoButtons:The mouse needs to be double-clicked when dealing with blocks.
Help_BlkOnAltScrn:Displays a prompt if the selected block is on the alternate screen.
Help_CopyBlk:Displays a prompt before copying a block.
Help_DrawBox:Displays a prompt before drawing a solid or transparent block.
Help_MoveBlk:Displays a prompt before moving a block.
Help_DeleteBlk:Displays a prompt before deleting a block.
Help_EraseBlk:Displays a prompt before erasing a block.
Help_RegrabBlk:Displays a prompt before regrabbing the block from the screen.
Help_RegrabAltScrn:Displays a prompt before regrabbing the block if its on the alternate screen.
Help_ClearScrn:Displays a prompt before clearing the current screen.
Help_PaintBlk:Displays a prompt before painting the block / area.
Help_WashBlk:Displays a prompt before washing the block / area.
Help_ClearBlk:Displays a prompt before clearing the block.
Help_ClearPat:Displays a prompt before clearing the pattern.
Help_SelectPat:Displays a prompt before selecting the block as a pattern.
Help_SameValues:Displays a prompt before washing or painting if the character and current values are all the same.
Help_Terminated:Displays a prompt if the command is terminated.
Help_LoadErrors:Displays a prompt if errors found during loading.
Help_SaveErrors:Displays a prompt if errors found during saving.
Help_Select1:Displays a prompt for selecting corner 1.
Help_Select2:Displays a prompt for selecting corner 2.
Help_SelectBlk:Displays a prompt before selecting a new block.
Help_NoBlk:Displays a prompt if a command on a block is to be executed but there is no block selected.
Help_Help:Displays a prompt if the help file wasn't found during initialisation.
Help_Modified:Displays a prompt if the screen has been modified.
Help_GlobalColour:Displays prompt before doing a global colour change.
Help_NoPat:Displays a prompt if a command on a pattern is used and no pattern is selected.
Help_PosBlk:Displays a message while positioning a block.
Warnings_Window:Do not change these options without first reading the USER GUIDE. IT COULD BE RATHER FATAL!!!!!!
LeftIcon:Scroll backwards through the menu options.
RightIcon:Scroll forwards through the menu options.
IconText:The text as it appears on the menu.
CPanelOpts:Options for setting the Control Panel.
MouseOpts:Options for using the Mouse buttons with the block commands.
MainKeyOpts:Icon for setting the main function hot-key for entering AnsiEdit.
ExtraKeyOpts:Icon for setting the Extra hot-key for entering AnsiEdit.
OKIcon:Click here to set the editor options.
CancelIcon:Click here to ignore the icon settings.
AnsiVer:This is the version of AnsiEdit that you are using.
BlockOpts:Allows the setting of some of the options for the block commands.
WarningOpts:Allows the setting of the Major and Minor warnings.
IncreaseIcon:Increase icon by 1.
DecreaseIcon:Decrease icon by 1.
LoadDetails:Set options for when loading a file.
GenMessage:Displays information or error messages from AnsiEdit v2.30
GenOK:Click here to clear the window from the screen.
QuitWindow:You have quit with a modified file still in memory
DiscardChanges:Discard the changes and quit
CancelQuit:Cancel the quit so you can save the changes
PrintLF:Toggles the printting of a line-feed on and off
ColourIcon:Clicking this icon will change the dull icons to colourful icons. The AnsiEdit disk must be in the disk drive.
DullIcon:Clicking this icon will change the colourful icons to dull icons. The AnsiEdit disk must be in the disk drive.
ScrapDirs:This window shows 3 commonly used scrap directories. If you want one to be the current scrap directory just click on it. Its name will appear in the icon. Clicking on the option windows 'OK' icon, will then set it.
